I-view EC-5MIPN 5-Megapixels Day/Night Box IP Camera User Manual

5/2-MEGAPIXELS NETWORK CAMERA Version: V2.0 Doc. No.: 1030317001 EC-5MIPN/3MIPW/2MIPS/2MIPN BOX NETWORK CAMERA US

10 I/O Port Audio in (2Vp-p); Audio out (30mW/600 ); Alarm in x1; Alarm out x1; TV out, DC in, RJ-45 ( LED indicates power /linking status), Reset b

11148mm (L) x 78mm (W) x 78 mm (H) / 0.65Kg Operation Power: Maximum 3 W; PoE IEEE 802.3af Class 3; DV12V Temperature: Temperature -10°C ~ 50°C;

12 DNS, SNMP, RTSP, RTP/RTCP, Bonjour, PPPoE, QoS, UPnP, IGMP; uPnP and 802.1x. Interface: 10BASE-T/100 BASE-TX; Wi-Fi (Via USB optional) Com

13 Housing Mental Housing Dimension/Weight 148mm (L) x 78mm (W) x 78 mm (H) / 0.65Kg Operation Power: Maximum 3 W; PoE IEEE 802.3af Class 3; DV

14 External Microphone input; Speaker output. 2Vp-p audio input and audio output with 600 impedance. Network Protocol: HTTP, HTTPS, TCP/ IP, IPv4,

15 Event notification: Notify to FTP, email, Samba server or Digital output triggered. Update: Support Firmware update. Browse I.E. 7.0 above; Safa

16 WDR: 83.5dB Overlay: Text / Time Stamp Audio Setting -Low/ a-Low G.711 audio encoding and decoding; 2-way audio. External Microphone input; Spe

17 data to FTP/SMTP sever. Management Time management: Manual Time Setting; Time Server and NTP support; Real Time Clock. Event management: Events

18 1-3 Packaging Contents Please check the contents of your new Network IP Camera when you unpack the package. If any item is missing, pleas

19 1-5 Product Parts Function Description 1. Lens: Choice the C or CS-mount Megapixels Lens. 2. Fix Screw: The Screw to fix the Lens ad

2Safety information This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

20 7. Network Port: Used to connect a PoE or LAN cable. Power indicator (Green LED) will be on when connect with the PoE Hub; the Orange LED will

21 Chapter 2. Camera Installation 2-1 Mounting the Lens Disconnect the power before proceeding.  Mounting the CS lens: Turn the optional CS le

22 2-3 Connecting to Audio Input / Output  Connect the audio in port of the camera with the microphone which provides 2Vp-p output level. 

23 Chapter 3. Running IP Camera by Witness Pro NVR software 3-1 Network Deployment General Connection (without PoE) 1. Connect RJ45 Ethernet cab

24 Fig. 1-3-1.2 Choose a setup language Fig. 1-3-1.4 Installation Startup 3-1. Install Witness Pro NVR software You can use your new Network IP Cam

25 Step 5. Click the “Browse” button to install into a different directory, otherwise click on the “Next” button to install the software into the

26 3-2. Setting IP camera for Witness Pro NVR software Click “ Start “ >> “ All Programs” >> “Witness NVR32 Pro”, then select the “ Vi

27  Vendor & Model: Select the correct brand and model for the connected IP camera. You also can select “Onvif” if your IP camera support O

28  Advance setup: Click this icon will enable the detail parameters setting of IP camera. You need to load the Active X if this NVR is activated t

29 Chapter 4. Running IP Camera by I.E. Browser You can use your new Network IP Camera by its web user interface via I.E. web browser. The requirem

3filled with water on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects. 7. If any unusual sme

30 Step 2. Press “Search “button to search for all IP Cameras on your local network. Step 3. If you need to change IP address, double click

31 If you connect to IP Camera first time, you’ll see the following message; this message prompts you that you need to install ActiveX plug-in before

32  IE 10 version: Click ‘Install’ button located at the bottom of I.E. to install ActiveX plug-in. You need to do the process as below: Click “

33 4-2. The Function Description of Live Window After ActiveX plug-in is installed, you should be able to see the live video from IP camera as be

34 7. Screen: Choice the video streaming on the screen. 8. View: Click this icon to display the video of IP camera. 9. Play Mode: Click this i

35 4-3. The Network setup Function Description Click “ Setup “ icon to start setup the parameters of IP camera. You can configure basic IP cam

36 address, enable/disable DHCP and DNS IP address. The settings must be properly configured before you operate the IP camera over network. IPv4

37  Device Port: If there is a router and you want to access the speed dome through Wide Area Network (WAN), you need to forward the 3 ports for the

38 of a year, you can turn this function on. The time will be adjusted automatically when the Daylight Saving Time (DST; Summer time) comes. Conf

39  UPnP: Click this button to enable the UPnP (Universal Plug and Play) function. UPnP™ is a networking architecture that provides comp

4IMPORTANT SAFETY INSTRUCTIONS  Read these instructions.  Keep these instructions.  Heed all warnings.  Follow all instructions.  Do not use th

40  DDNS: Click this button to setup the DDNS function, there are three default DDNS server for the user choice. If your IP Camera is set to use

41 Transport Mode: Enable SSL function; please check the SSL if it is required by the SMTP server. Receiver email address: Entry the receiver email a

42  Media Configuration: Click this button to setup the media parameters of IP camera and the detail description as below: The RTSP comm

43  Source Resolution: Select video main streaming resolution from the drop menu.  Streaming ID: Streaming 1 means is the “ Main Streaming

44 the mirror. The flip direction can be set to off, horizontal and vertical mirror position.  Exposure: Provides auto and fixed mode, the max valu

45  D/N mode: Enable “ Passive “ mode and keep on the “Black & White” mode of Night color tab when you use IR type IP camera and none IR LED cam

46  Audio setup: Click this button to setup the audio recording, it supports the gain from 1-100. there are 2 audio codec (G7.11 uL

47  Video system: Choice the video system for the TV out (Composite signal). . The maximum frame rate will be 30 fps when choice th

48 Alarm output: Setup the name of alarm output; define the mode (NC or NO) and trigger period. (0 ms: Continue trigger)  Alarm T

49  Alarm trigger: The alarm trigger almost same as Motion alarm, please refer the description of Motion alarm section.  Alarm interval: The trigg

5SAFETY INFORMATION FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: 1. This dev

50 on difference storage device. Please refer the detail process as below:  Recording: Enable the” Schedule” recording and you can select “Cont

51  Post-record: The time you set to stop recording after the scheduled time or the event. For example, if an alarm triggered recording ends at 11:0

52  “SD Card ”: Setup the recording path on SD Card. You need to format the SD card from the IP camera before you used.  Local path: Setup

53  Group: Define the privilege of Group user, there are three levels Group: Administer, Operator and Media user.  User: Click this button to cr

54  Reset: You can choice reset the IP address or all parameters become to the default setting. Click the “ Reset IP address “ icon just

55  System upgrade: Click this button to upgrade IP camera’s firmware. Click ‘Browse’ button to select a firmware image file on your computer fir

56 Chapter 5. Troubleshooting Before you send this IP Camera back to your dealer when you found this IP Camera is not working properly, please che

6About This Guide Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols to use thr

7Table of Contents Chapter 1. Introduction ---------------------------------------------------------------------------------------- 8 1-1 Highlights

8Chapter 1. Introduction 1-1 Highlights of your new Network IP Camera Congratulates on purchasing this high-resolution 5M pixels network IP Cam

91-2 Product Specification EC-5MIPN System Platform: TI DM368 SoC CPU; Linux Embedded O.S. Image Device 1/2.5" 5 M pixels (2592x 1944 pix