I-view CP-4800DX Hybrid DVR Card User Manual download pdf

CP-4800DX XP DVR Board Hardware Manual (V1.0)

This section details the installation of CP-4800DX Pro DVR board and how to make the necessary connections.

You may install up to 2 cards into a PC to reach 32 Video and 32 Audio input. The primary one is referred as

CP-4800DX XP 0, the other one will be called CP-4800DX XP 1. Before you start, please make sure that your

PC is off, and the power cable is unplugged.

The DVR system is called CP-9600DX when combine the CP-4800DX XP 0 and XP 1 card onto a

PC together.

The description of CP-4800DX Pro (as Fig 1) pins and sockets:

1: Video input –DB25 pin to connect the D-Sub BNC cable for video input.

2: TV out – RCA connector provide split video output signal.

3&6: Transmit split video signal – Link the (3) socket of CP-4800DX XP 1 into the (6) socket of CP-4800DX

XP 0 DVR board to get 1-16 or 17-32 split video output via RCA Connector (2). (Optional)

4: Video looping- Connect to a video looping board for video loop-out.

5&7: Combine Spilt video signal – Link the (5) socket of CP-4800DX XP 0 into the (7) socket of CP-4800DX

XP 1 DVR board to get 32 split video output via RCA port. (Optional)

8: LED – The indicator of auto reboots function. (CP-4800DX XP 0 only)

9: RESET- System failure socket, connect to the “ Reset “ socket of PC Motherboard. (CP-4800DX XP 0)

10: EM_B – Panic button socket for emergency call. (CP-4800DX XP 0 only)

11: Sensor connector-Connect to the sensor cable of the remote controller. (CP-4800DX XP 0 only)

12: J_USB – Connect to USB cable to the USB port of PC Motherboard.

13: Power connector – Plug power in put from power supply of the PC to provide the power for the DVR card.

(Fig 1)

1 2 3 4

Page 1

1CP-4800DX XP DVR Board Hardware Manual (V1.0) This section details the installation of CP-4800DX Pro DVR board and how to make the necessary connec

Page 2

214: Audio in - Connect to an audio board for 16 audio input. (Optional) 15: Sensor Signal– Connect the Card 0 and 1 via both ports to control split

Page 3

31 2 3 Fig 10 it will cause the sensor damage. 2. Make sure that the sensor itself is not covered and is facing the place from where you will be us

41. Completing Setup Complete setup by following three steps: 1. Run Witness XP program, login, and press the System configuration

No comments

I-view CP-4800DX Hybrid DVR Card User Manual