I-view CP-3160RD Real Time Recording DVR Card User Manual download pdf

CP-3160RD Deluxe DVR Board Hardware Manual (V1.6)

This section details the installation of your CP-3160RD Deluxe DVR board and how to make the necessary

connections. You may install another Daughter Card into a PC to reach 32 Video input. The primary one is

referred as CP-3160RD Deluxe 0, the other one will be called CP-1605RD Daughter card. Before you start,

please make sure that your PC is off, and the power cable is unplugged.

The DVR system is called CP-3320RD Deluxe when combine the CP-3160RD Deluxe 0 and CP-1605RD

Daughter card together. The CP-3320RD Deluxe can supports 32 video input.

The description of CP-3160RD Deluxe 0 (Fig1) and CP-1605RD Daughter Card (Fig1-1) pins and sockets:

1: Video input –DB25 pin to connect the D-Sub BNC cable for video input.

2: TV out –S connector for single and split video output.

3: Video looping- Connect to a video looping board for video loop-out.

4: 40 Pin (2x20) male connector – Connect to the 1605RD Daughter Card.

5: EM_B – Panic button socket (CP-3160RD Deluxe 0 only)

6: RESET- System failure socket, connect to the “ Reset “ socket of PC Motherboard. (CP-3160RD Deluxe 0)

7: LED – The indicator of auto reboots function.

8: Sensor connector-Connect to the sensor cable of the remote controller. (CP-3160RD Deluxe 0 only)

9: Audio in - Connect to an audio board for audio input. (CP-3160RD Deluxe 0 only)

10: J_USB – Connect to USB cable to the USB port of PC Motherboard.

11: Jump– DVR number selection. The CP-3160RD must select the Card 1 when combine with CP-1605RD.

12: 4 Pin power socket – The socket for power input from power supply of the PC. (CP-1605RD only)

(

)

(

1-1

)

1 2 3 4

1CP-3160RD Deluxe DVR Board Hardware Manual (V1.6) This section details the installation of your CP-3160RD Deluxe DVR bo

Page 2

2(Fig 2)(Fig 4)(Fig 5)(A) System Failure Connections cable as shown in “Fig 2”: The DVR system will reboot and restore to the original status automat

Page 3

3(Fig 11)DB-25 Pin BNC Audio Connectors Controller. Please follow the process as below to achieve this function: a. Please use the shading cable

Page 4

41. Completing Setup Complete setup by following three steps: 1. Run Witness XP program, login, and press the System configuration button. In th

No comments

I-view CP-3160RD Real Time Recording DVR Card User Manual